January 21, 2020

Beko AC Error Codes|Fault Code

Beko AC Error Codes|Fault Code

Beko AC Error Codes|Fault Code,When the condition of the air conditioner ib is abnormal, the temperature indicator on the indoor unit will blink to display the corresponding error code. Please check the blow list to identify the error.

H1 stands for defrosting status. This is a normal phenomenon.

E5 This can be terminated after restarting the unit. If not, please contact qualified person for service.

U8 It can be terminated after restarting the unit. If not, please contact qualified person for service.

H6 It can be terminated after restarting the unit. If not, please contact qualified person for service.

C5 Please contact qualified person for service.

F1 Contact qualified person for service.

F2 Contact qualified person for service.

Note: If there are other error codes, please contact qualified person for service.

Warning
When a down event occurs, please turn off the air conditioner and cut off the power immediately, and then contact the dealer or qualified person for service.

The power cord is overheated or damaged.
Abnormal sounds occur during operation.
Circuit brake trips often stop.
The air conditioner turns off the burning smile.
Indoor cohesion leaking.

* Do not repair or refine the air conditioner by yourself.
* If the air conditioner is operating under abnormal conditions, it may be prone to malfunction, electric shock or fire.

Beko AC Error Codes|Fault Code troubleshooting

Check the following points before repair or service. If the Error persists, please contact your dealer or service center.

* Air conditioner does not do any work.
-You made a mistake in timer operation?
-Is the fuse blown or the MCB tripped?

* The room smells peculiar.
-Note that this is not an odor emanating from walls, carpets, furniture, or fabric items in the room.

* It seems that condensation is leaking from the air conditioner.
-Infection occurs when the airflow from the air conditioner cools the warm room air.

* Does not work for about 3 minutes when the air conditioner restarts.
– It is the protector of the system.
– Approximately three minutes and the operation will begin.

* Does not cool or heat effectively.
– Is the air filter dirty? See air filter cleaning instructions.
– Is the temperature set incorrectly?
– Are the air inlet or outlet vents of the indoor unit obstructed?

* Air conditioner operation is noisy.
-With a noise that sounds like water flowing. This is the sound of freeze flowing inside the air conditioner unit.
-With a noise that sounds like compressing the air released into the atmosphere. This is the sound of dehumidifying water being processed inside the air conditioning unit.

* Remote control display is faded, or no display at all.
Out of battery?
Is the battery inserted in opposite (+) and (-) directions?

* Crack sound is heard.
This sound is produced by expansion / obstruction of the front panel etc. due to change in temperature.

ALSO READ THIS