Bosch Dishwasher E15 Error Code How to Fix It

Bosch Dishwasher E15 German business Bosch is renowned for producing premium, expertly crafted appliances and auto parts. The cutting-edge features and long lifespan of Bosch dishwashers have earned them a special place in the industry. But eventually, a problem that results in an error code will arise with even the best-built dishwashers. You should find the problem and solve it as quickly as you can because the dishwasher frequently stops working when an error code is activated.

It means there is water in the dishwasher’s base if your Bosch dishwasher displays the Error Code E15. The front panel and kickplate of the dishwasher might need to be taken off, although in most circumstances, this problem code is simple to resolve. In order to guarantee that the error code won’t recur and to stop further harm from being done to your house or the dishwasher, the cause must also be looked into.

Fixing a Bosch dishwasher E15 error code is as simple as following the steps below.

Try to erase the error code In Step 1.

A control board malfunction may also be to blame for the Bosch E15 error code, which most likely indicates that there is too much water in the dishwasher. If the error code was brought on by a glitch, performing a hard reset by cutting off the dishwasher’s power for five minutes should erase the error code. You’ll need to drain the dishwasher’s water reservoir if the error code reappears.

Step 2: Think about the tilt Approach.

By tilting the dishwasher backward at a 45-degree angle, you can also swiftly erase the error number and perhaps even fix the issue. It’s unlikely that tilting the dishwasher will be a permanent solution, and it might even make the problem worse. In addition, it is doubtful that you will find and address the error code’s root problem, which might be a leak with lethal consequences.

It will be necessary to remove the dishwasher from below the kitchen cabinet and carefully tilt it back at a 45-degree angle if you choose to use this technique to fix the E15 error code.

The water in the base of the dishwasher should release when it is tilted, erasing the problem code. Prior to moving the dishwasher, make sure the water and power are turned off, and place something down to catch any spilled water. The error code ought to be gone after the power has been turned back on.

Step 3: Drain the water and turn the water level safety switch back on.

The water in the dishwasher’s base should be wiped up, and the water level safety switch should be reset, since this is typically the easiest way to fix the Bosch dishwasher E15 error code.

The outer dishwasher door panel and the dishwasher’s kickplate must be taken off to have access to the safety switch. The outer door panel and kickplate are typically removable with the help of a T20 or T15 Torx screwdriver, a Phillips-head screwdriver, or both, depending on the model.

The Water Level Safety Switch For The Dishwasher Can Be Accessed By Following These Steps:

• Turn off the power at the electrical panel in your home, unplug the dishwasher, or both to disconnect it from the power source.
• Disconnect the dishwasher’s water supply.
•  Open the dishwasher door, then place it flat on the counter.
• Find the six screws that connect the inner and outer panels of the inner door and remove them.
• Using caution, put the dishwasher door back in the open position.
• Discard the exterior dishwasher door panel.
• Disengage the screws holding the dishwasher’s toe kick plate or bottom access panel.

You should have access to the dishwasher’s base and the basin in the centre, which contains the safety switch, once the outer door panel and kickplate have been taken off. You should discover a polystyrene disc behind the safety switch, which is typically covered in plastic.

You should have access to the dishwasher’s base and the basin in the centre, which contains the safety switch, once the outer door panel and kickplate have been taken off. You should discover a polystyrene disc behind the safety switch, which is typically covered in plastic.

What Functions Does The Safety Switch Have?

In front of the polystyrene disc and basin is where the safety switch is mounted. The polystyrene disc floats upward with the water as the basin’s level rises. The disc engages the safety switch when there is too much water, resulting in the E15 error code.

Resetting the switch and eliminating the E15 error code involves the following steps:

• To remove the safety switch, pull and twist it to the side.
• Take out the polystyrene disc. Be careful not to harm it.
• Mop up the water in the basin and dry the disc with a towel or cloth.
• Verify that there are no objects in the basin, such as wiring, insects, or food debris, that could obstruct the operation of the safety switch.
• Reinstall the polystyrene disc in the basin.
• Reinstall the safety switch in the basin. Make sure it is securely fastened.
• Examine the wiring to make sure it is not harmed in the dishwasher base. A qualified technician will almost certainly have to replace any damaged wiring.
• Look into the E15 error code’s origin. A hose may be dripping. Any damage that might be producing a leak are you able to see?
• Put together the dishwasher again.
  You should now be able to resolve the Bosch dishwasher error number E15. To make sure the problem is fixed, you must also ascertain what generated the error code. Instead of a leak, it’s probable that the incorrect detergent was what set off the error signal (see below).

The E15 error code in a Bolsch dishwasher: what is it caused by?

1. A detergent against which your dishwasher is not advised
2. An excess of detergent
3. Water that is being misdirected by clogged or broken spray arms.
4. The sump basin is leaking (the area where the filter is located)
5. Leaking hoses
6. A water tank that is leaky

Conclusion
An excessive amount of water in the dishwasher’s base can result in a Bosch E15 error code. Resetting the safety switch while the basin is empty is the best method to resolve the E15 problem code. In order to prevent the error code from occuring again, you must first identify what caused it.

The Majority Of Bosch Dishwashers, Including The Following Models, Are Covered By This Manual:

 SHE4AP06UC/06  SHE4AP06UC/06  SHE55M12UC/64  SHE55M15UC/64  SHE55M16UC/64  SHE55M16UC/64, SHE58C05UC/48  SHI4302  SHI4306  SHI6802  GM926710   SHE43P25UC/64  SHE45M05UC/50  SHE45M05UC/50   SHE45M06UC/50  SHE45M06UC/50 

YOU MAY ALSO READ THIS

• Whirlpool Inverter AC Error Code | Troubleshooting
• Bosch Refrigerator Error Codes
• How To Fix Scratched Game Disk
• BOSCH Coffee Machine Error Codes
• Bosch Dishwasher Error Codes
• Acson Air Conditioner Error Codes

Ballu Air Conditioner Error Code

Ballu air conditioner error code Ballu Air Conditioner Error Code Ballu air conditioner error code,MFS2 series E1, E2, E3, E4 - Temperature sensor (internal or external unit, condenser temperature, evaporator temperature) is small or broken. E6 - External unit safety tripped E8 - Closed Electrostatic Filter P4 - Error on ...
Read More

AmeriCool Air Conditioner Error Codes

AmeriCool Air Conditioner Error Codes AmeriCool Inc., a major manufacturer of portable air conditioners, is introducing a new product from a range of small commercial air conditioners WMC-2500 Since April 2013, the California company has released five new portable air conditioning devices. AmeriCool Inc. introduced even more innovative air conditioning ...
Read More

Amana Washing Machine Error Code

Amana Washing Machine Error Code Amana Washing Machine Error Code The history of the Aamna brand dates back to 1934. It was named after the place it was founded (Middle Amana, Iowa). Today, it manufactures an array of home appliances, including products for kitchens, laundry and heating. The list of ...
Read More

AMANA Air Conditioner Error Codes

AMANA Air Conditioner Error Codes AMANA Air Conditioner Error Codes CODE = FP Mode Status = Freeze Protection Attached. Room temperature is measured by a wireless remote thermostat or indoor ambient thermistor activated sensor Falls below 40 ° F. Display = y Error light = n Necessary action = No ...
Read More

Acson Air Conditioner Error Codes

Acson Air Conditioner Error Codes Acson Air Conditioner Error Codes A1 Indoor PCB ERROR A3 Drone Pump ABNORMAL A5 ANTIFREEZE (cooling) / heat accelerator overheating (heating) A6 Indoor Fan Motor Atal AH Electrical AIR Cleaners AB C4 INDOOR HEAT EXCHANGER (1) THERMISTOR SHORT / OPEN C5 INDOOR HEAT EXCHANGER (2) ...
Read More

Aeronik Air Conditioner Error Codes

Aeronik Air Conditioner Error Codes Aeronik Air Conditioner Error Codes Aeronic air conditioners not only provide heating or cooling Air in a residence or office. They make a favorable microclimate Inside the house taking care of the well being of a person. These air conditioners are long Time-tested, high level of utility. Aeronic ...
Read More

Aerotek Air Conditioner Error Codes

Aerotek Air Conditioner Error Codes Aerotek Air Conditioner Error Codes Aerotech produces climate equipment that does not The modern world is inferior to analogs and has fairly reasonable prices.All products are distinguished by the optimal "price-quality" ratio. forAir conditioners of this brand are used to produce components High quality only. Therefore, for ...
Read More

AKAI Air Conditioner Error Codes

AKAI Air Conditioner Error Codes This Akai air conditioner is equipped with a self-diagnosis (Error Codes) function to help you identify potential Issuess. Should you face Issuess with your air conditioner,  Contact our sales support center using the description at the bottom of the page. However, before calling for service, ...
Read More