January 23, 2020

Candy Dishwasher Error Codes

Candy Dishwasher Error Codes

Fault code interpretation Probable dishwasher malfunction

E1 Fail of water filling, signal “full tank” is not reached for 4.30 min. after the start of the bay.
Chains of the device.
Channels of flooding / draining of water.
“AQUASTOP”.

E2 Drain fault, the “empty tank” signal is not reached within 4 minutes after the start of the drain.
Chains of the device.
Channels of flooding / draining of water.
“AQUASTOP”.

E3 Error reaching the set value for the water temperature for the wash cycle.
A heating element.
Heating control circuits of the device responsible for heating.

E4 The anti-leakage system has been activated. Water in the pan.
Chains of the device.
Channels of flooding / draining of water.
“AQUASTOP”.

E5 The NTC temperature sensor is broken or short-circuited.
Sensor defective / open.
Breakage in the connectors / wires.
Temperature (<-5 ° C)

You Can Also Read