Fridge Temperature setting 1-9 | Cold, Colder, Coldest

Fridge Temperature setting 1-9 Control Dial – What Do The Numbers Relate To? – Cold, Colder, Coldest

Fridge temperature setting 1-9,Question: Our old fridge seems colder than usual. The number on the refrigerator setting dial is 0-9. The problem is that there is no indication of what number (high or low) to set the dial to cool or heat the refrigerator.

Usually, which number is the coldest on the refrigerator? Highest number or lowest number? Quick answer: high number is the coldest setting.

Refrigerator temp control setting number

Most refrigerator temperature settings are controlled with a dial or slider. They are sometimes labeled 5 through 9 or 1 through 1. If you are not sure what to set it, set it somewhere in the middle. If the dial is numbered 1 to 5, set it to 3, if the dial is numbered 1 to 9, set it to 4.

Use a higher number on the temporary control dial, the colder temperature your fridge will get. If your drinks and food are not as cold as you like, dial the temperature one number up. If it is at 3 and you want your food cold, set it to 4 and test it 12-24 hours later to see if your food is at the temperature you want.

Fridge Dial Settings The oldest refrigerator will have a simple temperature dial control setting as seen above.                    

Most Kenmore, LG, Samsung, Maytag, GE and newer Whirlpool refrigerators have a true digital readout that displays accurate temperatures. These new refrigerators still have temperature control sliders, knobs, dials, and digital touch pad controls. This makes it very easy to know and control the exact temperature in your fridge or freezer.

The best thermometer inside the refrigerator, like the thermometer above, is perfect to keep in your fridge to know the exact temperature.

An easy way to find out the exact temperature is to use a simple inexpensive thermometer in the fridge. Most refrigerator controls do not show the actual temperature so it is a good idea to use a thermometer. Your refrigerator must be below 40 degrees F to be safe. Just about any refrigerator has the best temperature ideally at 37 degrees F.

If the settings on your temperature control dial are making the fridge too cold or too hot, use a thermometer reading to adjust the settings dial until you have the best temperature. Allow 12 to 24 hours between each adjustment. Low (cold) temperatures are important to prevent bacterial growth and to keep your food fresh for longer. Here is information on storage of food at safe temperature.

Refrigerator temperature setting recommendation

 If you change the dial to number 0, it effectively turns off the fridge. Setting the dial to 9, the refrigerator will be operating at its maximum capacity. Your individual temperature setting will depend on how much food is kept in the refrigerator. If your fridge is full of food, it needs to be on a high number of settings to maintain a low (cool) temperature.

The temperature controller dial or slider on your refrigerator is a thermostat. When the fridge is not cold enough it kicks the compressor. The refrigerator then turns off the compressor when the desired temperature has been reached. The more food you have in your refrigerator, the higher the temperature will be stable. Set the thermostat in the middle of its range and leave it for 12 to 24 hours.

Adjusting Side-by-Side Refrigerator Temp Control – Knobs

Adjusting the Freezer Refrigerator Temp Control Below – Nibs

Where should my refrigerator controls be set?

If you have seen a refrigerator temperature control that is completely different from the types we mentioned, please leave a comment below to advise our other readers on the same issue.

Netflix DNS Codes Updated 2020

Lg inverter freeze pcb LED 7 times blinking solution