How to Reset Whirlpool Refrigerator Control Panel

How to Reset Whirlpool Refrigerator Control Panel

(Whirlpool Refrigerator Control Panel Reset )How to Reset a Whirlpool Refrigerator is covered in this post. We’ve broken the solutions for you into several sections if you’ve had trouble figuring out how to reset specific aspects of this refrigerator…

Whirlpool Refrigerator Control Panel Reset
Whirlpool Refrigerator Control Panel Reset, Whirlpool Refrigerator Control Panel Reset

Replace the Filter Light in Your Whirlpool Refrigerator to Reset It

Follow these procedures to reset the replace filter light on your Whirlpool refrigerator:

1. Select an option by pressing the choices button. When you do this, three alternatives will appear.

2. From the drop-down menu, choose “Filter reset.”

3. Wait while you press the confirm button. A beep will sound after three seconds, indicating that the device has been reset.

The’replace water filter’ light may be reset in this video…

Whirlpool Refrigerator Control Panel Reset , Whirlpool Refrigerator Control Panel Reset

How to Reset the Ice Maker on a Whirlpool Refrigerator

Follow these instructions to reset the ice maker on a Whirlpool refrigerator:

Step 1: To turn off the ice maker, adjust the feeler. This is necessary in order to turn off the ice maker’s water supply. It is both safe and non-disruptive.

Step 2: Take out the ice tray and search for the reset button on the ice maker’s bottom.

Step 3: For around 10 seconds, press and hold the reset button. If the ice maker starts to turn again or if you hear a bell within the device, let go.

Step 4: If your ice maker does not have a reset button, locate the on/off switch and set it to ‘off.’ After that, disconnect the refrigerator and let it unplugged for 10 minutes.

Step 5: Reconnect the refrigerator and the light will turn on. The ice maker will be reset as a result of this action.

How to Reset a Whirlpool Refrigerator’s Defrost Timer

Remove the rear panel of the refrigerator and unscrew it to reset the defrost timer. Remove the gadget from the power supply. Locate the circular notch on the defrost timer and turn it anti-clockwise using a flathead screwdriver.
Continue rotating it until you hear the refrigerator’s fan turn off. The defrost timer has been reset, as seen by this.

How to Reset the Control Board on a Whirlpool Refrigerator

To reset this unit’s control board, open the refrigerator door and look for the door switches. In 10 seconds, press the switches and the refrigerator temperature button three times.

Release the switches and buttons, and the letter’s’ will appear on the freezer section’s panel. In the fridge area, the letter ‘e’ will be shown.

Once, press the fridge’s temperature button. Some numbers will appear on the display, with ‘1’ appearing on the freezer section’s display. The control board has been reset if the fridge display goes blank while the freezer display indicates ‘1’.

Specific Models of Whirlpool Refrigerators and How to Reset Them

How to Reset a Whirlpool Gold Refrigerator’s Control Panel
Follow these procedures to reset the control panel on a Whirlpool Gold refrigerator:

1. For 5-10 minutes, turn off the circuit breaker or disconnect the refrigerator.
2. Restart the refrigerator by resetting the circuit breaker or plugging it back in.
3. Switch on the cooling system.
4. Examine the control panel’s functioning.

How to Reset the Whirlpool Gold Refrigerator’s Ice Maker

To reset the ice maker on this machine, locate and remove the ice tray. On the bottom of the ice maker, you should see a bright RED reset button after the removal. Hold this button down for ten seconds.

Note: If the problem is too tough to solve on your own, always seek expert assistance. Attempting to fix your refrigerator on your own may result in further issues.

Related FAQs on How to Reset a Whirlpool Refrigerator

Can You Unplug a Whirlpool Refrigerator to Reset It?

Simply unplugging a refrigerator will reset it. To do so, disconnect the gadget for 30 to 45 minutes before turning it back on. This will reset the device and, in some situations, may be sufficient to resolve any issues.

In theory, all gadgets can be switched on or off, however the refrigerator is difficult to turn off.

What is the procedure for resetting my Whirlpool water dispenser?

By pushing and holding the “Water filter” button for three seconds, you may reset your Whirlpool water dispenser. When the device is reset, the water filter symbol returns to its original blue hue, and the “Replace Filter” prompt on the display screen is no longer displayed.

After a power outage, how do I reset my Whirlpool refrigerator?

After a power loss, press and hold the “Lock” and “Filter” buttons simultaneously for three seconds to reset your unit. The refrigerator’s cooling feature will be activated as a result of this action.

Resetting a Whirlpool Refrigerator

Follow these procedures to reset a Whirlpool refrigerator:

1. Locate the switches adjacent to the refrigerator door by opening it.

2. Press the switches and the temperature button three times in a 10-second period. This should bring your freezer back to life.

When you release the switches, look for a letter “S” shown on the freezer area to determine if the reset was successful. A letter “E” should appear on the refrigerator’s display to indicate that the reset has been completed.


Share and Enjoy !


Add a Comment

Your email address will not be published. Required fields are marked *