The LG French door bottom freezer type freezer is not working, but the refrigerator is. If your freezer is freezing too slowly or not at all, we can assist you in resolving the problem.
lg freezer not freezing
My LG refrigerator has an issue; the freezer isn’t working, but the refrigerator is still operational. Even though my LG refrigerator was cool, my freezer was not. I investigated the problem, discovered a solution, and implemented it. The freezer repair took 45 minutes in this case.
LG refrigerator works but freezer does not?
To rule out other possibilities, disconnect it for 24 hours to observe whether the wire inside has been frozen. Yes, you’ll need a second freezer to keep your food safe while you’re doing this. Also, double-check all seals and vents for obstructions, level the refrigerator, and adjust the temperature settings properly.
air vent location
Do not block the air vents on the LG refrigerator
Problem:The LG refrigerator’s freezer isn’t working. Everything was tossed into the freezer as it began to defrost. I saw that the ice machine had stopped working and that everything in the freezer was mushy. The freezer isn’t freezing anything, but the refrigerator is good. The number of freezer temperatures was adjusted from high to low with no impact. I adjust the thermostat all the way down and then back up for a few hours, but nothing seems to work to get the freezer to function.
To make sure the automated self-defrosting wasn’t a problem, I did the easy thing of defrosting it first. I also left it unplugged for 24 hours to check whether the wire inside had become frozen. This was ineffective in resolving the issue. However, if you live in a dusty area and haven’t cleaned the pan in the rear of your refrigerator, consider the following solution.
Solution: I removed the refrigerator’s back panel and was able to access the pan’s drain pipe. A couple more pots of dusty water lay on the bottom shelf. Dust had gathered across the space. I vacuumed up all of the dust and debris using a shop vac. The lower hose slipped and landed in the filthy water. The troubleshooting was completed in order to remove any dirt and dust. I blasted compressed air into both the freezer and refrigerator to make sure the line was clean, which tested the airflow on the other side and let the air out.
Remove all dusty dirt from refrigerator coils
There was a dust problem. The heat is dissipated via the coils on the bottom of the refrigerator/freezer. Heat may not be discharged or something may become trapped or clogged if the refrigerator’s coils or other components are coated with dust or grime. As the condenser fan is positioned, vacuum the refrigerator/freezer coils and clean them completely.
Tip:If the freezer and refrigerator are both hot, it’s likely due to a filthy condenser coil located between the compressor and fan at the bottom of the device. It should start operating correctly after being cleaned and vacuumed.
If your LG refrigerator freezer has a linear compressor, the linear compressor employs vent doors to manage freezing and freezing, thus there might be an issue with the venting.
What else could be the reason for the LG Freezer not working?
Condenser Coils Are Dirty – Evaporator Fan Motor – Start Relay – Evaporator Coil Frozen
Dirty Condenser Coils Issue:
You don’t need to clean the condenser coils if they’re positioned inside the freezer’s walls. You should clean the condenser coils every 6-12 months, whether they are conveniently accessible from the rear or under the unit. If the condenser coils are unclean, they will be unable to adequately disperse heat, reducing the cooling capacity of your freezer dramatically. Clean the condenser coils if they are unclean or haven’t been cleaned in a long.
Evaporator Fan Motor Issue:
The air extracted from the freezer’s coils is circulated to the evaporator and throughout the freezer by the evaporator fan motor. Your freezer will not freeze if the evaporator fan motor is not working. By opening the freezer door and activating the freezer door switch, you may inspect the evaporator fan motor. If the door switch is triggered but the evaporator fan motor does not turn on, replace the evaporator fan motor to get the freezer working again.
Start relay problem:
The fridge/freezer compressor is powered by the start relay. The compressor will not start if the start relay fails. When the compressor in your refrigerator or freezer fails to switch on or function correctly, your freezer will not chill. To check if the start relay is malfunctioning, unplug the freezer and remove it from the compressor. Check the start relay using a multimeter. Check the start and run terminals for continuity. Remove and replace the relay if it lacks continuity.
Evaporator Coil Frozen Issues:
Is your defrost system causing you problems? To melt the frozen frost on the freezer’s evaporator coil, the defrost heater is switched on multiple times a day. Frost will collect on the evaporator coils if the defrost heater is not turned on, causing the coils to get frostbitten. Use a multi-meter to check for continuity to see whether your defrost heater is broken. Remove and replace the defrost heater if no continuity is found.
How to Reset Freezer on LG Refrigerator?
Open the right door of the LG refrigerator to reset the control panel. Then, for 5 seconds, press and hold the refrigerator and ice plus buttons. To indicate that the panel has been reset, it will chime and display the temperature settings.
After A Power Outage, The LG Freezer Would Not Freeze.
If your LG freezer isn’t freezing after a power loss, the first thing you should do is double-check the wall socket it’s hooked into. Check to see whether it’s still operating and if the power supply is still enough.
Then, if your freezer is connected to a refrigerator, check the power cable of the freezer or refrigerator. This is particularly important if there has been a power outage. It’s possible that the power cord has been burned. If everything appears to be in order, double-check that the cord is correctly connected into the wall socket.
When you’ve double-checked that everything is in working order, disconnect the machine or turn off the circuit breaker that powers it. Allow around 30 seconds without electricity before plugging it back in or turning on the circuit breaker. The freezer or refrigerator will be reset as a result of this procedure. Allow time for the compressor to settle and the unit to begin cooling; this might take anywhere from 24 to 48 hours. If the freezer still doesn’t start freezing after 48 hours, there’s an issue with the power supply, and you’ll need to call a professional repair agency.
It’s worth noting that following a power loss, the temperature in a freezer or refrigerator will take 24 to 48 hours to return to normal. So, before you begin any of the processes outlined above, give the unit this time.
What to Do If Your LG Refrigerator Isn’t Cooling or Freezing
Is your LG refrigerator on but doesn’t seem to be chilling or freezing anything? The following are sections of the unit to inspect for flaws:
Problem 1. Fan motor for the evaporator
Try spinning the blades with your hands to see whether the fan motor is broken. If the blades do not spin freely, the motor is defective and must be replaced. Also, if the motor is loud, something is wrong with it, and it has to be replaced.
If the fan motor is not functioning, use a multimeter to check for continuity. Replace the evaporator fan motor if there is no continuity. If the evaporator fan motor fails, the refrigerator’s fan will not be able to circulate cold air. As a result, the unit will not go chilly.
Problem 2. Condenser Coils
To get to the condenser coils under the refrigerator, move it. Examine them to check if they are filthy. If they are, clean them with your vacuum’s gentle brush attachment if it has one. To ensure that the coils work at their best, brush off every trace of dust. They will be unable to disperse heat, reducing the refrigerator’s ability to maintain the desired temperature.
Problem 3. Fan Motor for the Condenser
To test the motor, try turning the blades of the condenser fan. If the blades spin freely, the motor is most likely in good operating order. However, if they don’t spin freely, the motor is most likely broken. To be sure, use a multimeter to check the fan motor’s continuity. Replace the motor if there is no continuity. To cool the compressor, the condenser fan draws air through the condenser coils. As a result, if the fan fails and the compressor overheats, the refrigerator will not cool.
Problem 4. Begin the relay Use a multimeter to check for continuity between the start and run terminals to see whether the start relay is malfunctioning. Replace the relay as soon as possible if there is no continuity. Additionally, if the relay has a burned odour, it should be replaced. If the start relay fails, the compressor will struggle to start at all. Even if the compressor is turned on, it may only be on for a short time.
Problem 5. Thermistor
Test the thermistor using a multimeter (temperature control sensor). If everything is operating properly, the resistance will fluctuate in tandem with the temperature of the refrigerator. Replace the thermistor if the resistance does not change and there is no continuity. The thermistor measures the temperature of the air and transmits the data to the control board. The board, in turn, controls the flow of electricity to the evaporator fan and compressor, allowing them to operate. However, if the thermistor is defective, the measurements will be incorrect. As a result, the control board will not deliver power when it is required, and the fan and compressor will not operate. As a result, the refrigerator will not cool down.
Problem 6. Thermostat for Temperature Control
Turn the thermostat from the lowest to the maximum temperature setting to check it. The thermostat is in excellent operating order if you hear a click when it reaches the highest setting. If you don’t hear a click, use a multimeter to check the thermostat for continuity. Replace the thermostat if the multimeter does not read continuity at any temperature setting.
The compressor and fan motors receive electricity from the temperature control thermostat. The compressor and fan motors will not operate if the thermostat is malfunctioning, and they will not run if the refrigerant system is not running.
Problem 7. Turn on the Capacitor
Using a multimeter, check the start capacitor. Check to see if there is any consistency. Replace the capacitor if there is no continuity.
The compressor is able to start because of the capacitor. As a result, if the start capacitor fails, there’s a good risk the compressor won’t start at all.
If none of the following parts are faulty, examine the temperature control board, compressor, or main control board. Even though any of these three pieces is unlikely to fail, it is conceivable. Allow a trained refrigerator technician to examine the refrigerator, establish the true cause of the problem, and repair it.
It’s also worth noting that these instructions apply to all LG refrigerator models. So, whether you have a side-by-side refrigerator, a bottom freezer refrigerator, a French-door refrigerator, a top freezer refrigerator, or a mini-refrigerator, the procedures above will help you address the cooling and freezing problem.
Quick Fix for an LG Refrigerator Ice Maker That Isn’t Freezing
If your LG refrigerator’s ice maker isn’t freezing water or generating ice, try the following:
1. Determine the temperature
The unit must be kept at a temperature of -4 degrees Fahrenheit. If the temperature is greater than this, the ice maker will not freeze or produce ice. As a result, adjust the temperature as needed.
2. Check the Water Level The amount of water in the ice maker can impact whether it freezes or produces ice. Ice can only develop if the water level is above the water line. The ice maker will not be able to manufacture ice if the water level is below the water fill line. If the water level is higher than the water fill line, the ice maker will be unable to produce ice.
3. Examine the Water Source
Ensure that the water connection from the home faucet that delivers water to the ice maker is correctly attached. Try distributing water into a cup to see whether this is the case. The water line is correctly connected if it runs freely. If this does not occur, there is a problem with the water line.
4. Make that the water inlet valve is in good working order.
Using a multimeter, check the water inlet valve. If the solenoid does not indicate continuity, the valve should be replaced. It’s worth noting that the vast majority of LG refrigerators feature two water inlet valves. The primary one is located at the rear of the unit, while the second is located on the left door. The ice maker is in the secondary one.
5. Make sure the water filter is in good working order.
Water will not flow freely into the ice maker if the water filter is blocked. As a result, the ice maker will be unable to freeze. As a result, change the water filter at least once every six months.
6. Check the Pressure of the Water
The ice maker’s capacity to freeze will be harmed by low water pressure. Make sure the water pressure in the residence is at least 20 psi.
7. Inspect the Ice Machine
A faulty ice maker will be unable to produce ice. Look to see whether it’s dripping. If that’s the case, you’ll have to replace the entire ice machine component. Individual parts for an ice machine are typically difficult to come by.
It is critical to have a trained refrigerator technician inspect all of the items listed above. This is due to the fact that some of them are overly detailed and sophisticated. As a result, attempting to repair them yourself may result in worse harm.
Important Reminder
Always disconnect your LG freezer before attempting to troubleshoot why it is not freezing. The refrigerator is in the same boat. It’s the first step toward your and the unit’s safety. If repairing the device proves challenging, contact LG’s customer service department or a professional refrigerator repair company for assistance.
