November 18, 2022

LG Washer UE Code 8 Step To Fix It UE Error Code

By intakhab LG, LG Error, Uncategorized 0 Comments

LG Washer UE Code 8 Step To Fix It UE Error Code

LG Washer Ue Code The control board of your LG front-load washer has concluded that the load isn’t balanced if it is displaying a UE error code. Until the load is balanced or the problematic component that is causing the error code to appear is fixed, your washer will not spin when this occurs.

Ideally, a straightforward issue that you can readily resolve will be the cause; nonetheless, it is possible that a more complex issue exists that calls for a challenging repair. Follow our detailed instructions in this article to learn the answer.

Step 1: Try to balance the load.

Simple attempts to balance the load in the washer should be made as a first step. Be on the lookout for any tangled sheets or other bulky, heavy objects that could get caught up and prevent the washer from being weighted appropriately. To guarantee that the weight is more evenly distributed when washing a small load, you can add more things. If the problem code still exists after you’ve rebalanced the load, try again.

Step 2: Verify the washer legs.

Checking the washer’s levelling legs is the next step. Using a bubble level device and placing it on top of your washer to check for levelness is the simplest approach to determine if your washer is resting level. If it isn’t level, you’ll need to adjust the legs till it is. Since the legs can be turned, you can usually adjust them without lifting the washer. Additionally, be sure that nothing is underneath the legs and that they are firmly planted in the ground. After making the necessary adjustments, verify that the issue has been resolved; if not, move on to the next.

Step 3: Reset the washer.

The washer should then be reset in an effort to see whether the fault code disappears if neither of those first two actions are successful. You can accomplish this by simply switching the washing machine’s power off for a short period of time before turning it back on. The next action will be taken if the error code is still visible.

Step 4: Verify the Rotor Mounting Nut

The internal components will need to be checked to see whether they are defective if the previous three methods didn’t resolve the issue. Only if you have prior experience fixing appliances should you attempt these fixes because there is a small degree of risk involved.

Rotor mounting nut should be the first component to be examined. To help hold the rotor assembly over the stator, the rotor mounting nut is used.

Following are some steps to take to determine if it is the issue’s root:

Disconnect the washer’s power source.
In order to reach the stator assembly, remove the washer’s side panels.
Identify the stator assembly (check your manual if necessary).
Ensure the nut is securely fastened. If it isn’t, make it tighter.
As you inspect the mounting nut, make sure the bolts holding the stator in place are tight as well. If not, tighten them up.
At this point, you can try turning the electricity back on to see if the issue has been resolved; if not, proceed on to the next action.

Step 5: is to inspect the suspension rods.

The suspension rods should be the next thing you inspect if your washer is a top-loader. Step six is where you should go if your washer is a front-loader.

Your washer may occasionally vibrate and emit loud noises as a result of worn-out suspension rods. As a result, the UE error code may appear and your washer may become imbalanced over time.

Checking the suspension rods is done as follows:

Verify that the electricity has not been turned on.
In order to access the suspension rods on your washer, if you haven’t already, you’ll need to remove the panels.
Find the rods (consult your manual if necessary).
Once you’ve discovered them, examine them to see if there are any signs of damage or if they are broken.
If the suspension rods are broken, replace them. Then, see if the problem code has been eliminated. Proceed to the following step if not.

6 step: Inspect the shock absorbers

It’s important to inspect the shock absorbers if you have a front-loading washer. Your washer may occasionally vibrate and/or create loud noises if the shock absorbers begin to wear out. As a result, the UE error code may appear and your washer may become imbalanced over time.

Checking the shock absorbers is done as follows:

Verify that the electricity has not been turned on.
To reach the shock absorbers on your washer, if you haven’t previously, you’ll need to remove the panels.
Identify the shock absorbers (consult your manual if necessary). For easier access, you might have to tip the washer onto its side.
After discovering where they are, inspect the shock absorbers to see if they show any symptoms of damage or if they are broken.
If the shock absorbers are broken, replace them. Then, see if the error code has disappeared. Proceed to the following step if not.

Step 7: Check the Hall Sensor

The hall sensor should be checked if you still haven’t determined what’s causing your LG washer to display the UE error code. The hall sensor, also referred to as a rotor position sensor, serves as a motor performance indicator. Error codes may display when they shouldn’t when it becomes malfunctioning.

To inspect the hall sensor, follow these steps.

Ensure that the washer’s electricity is still off.
If you haven’t already, remove the panels.
Find the hall sensor (check your manual if necessary).
After locating it, check the sensor for continuity using a multimeter.
If there is continuity, everything is in functioning order, and you can move on to step eight. If it lacks continuity, though, it must be replaced. After being replaced, be sure the issue has been resolved.

Step 8: Change the Control Board

Replacement of the control board is the last stage. The best course of action is to simply replace the control board and see if that resolves the issue since it can be challenging to test control boards to identify the precise fault. You might be better off purchasing a new washing machine as this might be a quite pricey repair to make.

The following list includes information on all the main LG washer models:

WM2487HRMA/00 WM2487HWMA/00 WM2496HSM WM2496HWM/00 WM2688HNM WM2688HWMA/00 WM3070HWA WM3470HVA WM3470HWA RLM20K WD-10271BD WD-11275BD WD-13276BDM WD-90282BD WM2233HW WM2277HS WM2301HR WM2301HW WM2455HG WM2455HW WM2455HW/00

YOU MAY ALSO READ THIS