Samsung Washer Troubleshooting | Error Code

Samsung Washer Troubleshooting | Error Code

This troubleshooting guide for Samsung Washer Troubleshooting will assist you to fix your washer. We list common washing machine troubleshooting methods and the error or fault code that appears on your Samsung Washer display. These troubleshooting methods and error code definitions will allow you to diagnose, repair, and fix your Samsung washer. If you require any kind of assistance in fixing or repairing your Samsung front load washer, please leave a question below and we will be more than happy to assist you.

Samsung washing machine problem: Washer door is closed or will not open

Samsung Wash Fix / Solution:

1. Press the Start / Pause button to stop your washer.

2. Your washer door will remain closed during the heating part of the Sanitize cycle.

3. Door lock mechanisms may take some time to deteriorate.

4. Door switch latch may malfunction – replace Samsung washer door latch if necessary.

Samsung washing machine problem: The washer does not drain or spin

Samsung Wash Fix / Solution:

• Check fuse or reset circuit breaker.
• Make the drain hollow.
• Remove removed hoses.
• If there are any drain restrictions, troubleshoot them.
• Close the door and press the Start / Pause button.
• For your safety, your washer will not tumble or spin until the door is closed.
• Clean the debris filter – if it is full the washer cannot dry.

• 

  

Clean debris filter on Samsung’s front load washer

Ensure drain pipe is inserted correctly into the stand pipe so that the washing machine can drain

Samsung Washing Machine Problem: Washer Won’t Start

Samsung Wash Fix / Solution:

1. Make sure the door is firmly closed.

• Make sure your washer is plugged in.
• Make sure the water source taps are open.
• To start your washer, press the Start / Pause button.
• Ensure that child lock is not activated. (Disabling child lock function – press and hold the spin and soil level buttons simultaneously for about 6 seconds)
• Before your washer starts filling, it will make a series of clicking noise to check the door lock and perform a quick drain.
• Check fuse or reset the circuit breaker.

Samsung washing machine problem: no water or not enough water

Samsung Wash Fix / Solution:

• Turn on both taps completely.
• Make sure the door is tightly closed.
• Straighten water inlet hoses.
• Disconnected hoses and clear screens.
• Hose filter screen may be off.
• Open and close the door, then press the Start / Pause button.

• 

  

Press START / PAUSE button to stop and restart the program

Washer Water Supply Hoses – Ensure that screens are not closed and rubber washer is installed

Samsung Washing Machine Problem: Washer Stops Working

Samsung Wash Fix / Solution:

• Plug the power cord into the live electrical outlet.
• Check fuse or reset the circuit breaker.
• Close the door and press the start / stop button to start your washer.
• For your safety, your washer will not tumble or spin until the door is closed.
• Before your washer starts filling, it will make a series of clicking noise to check the door lock and perform a quick drain.
• The cycle may have a pause or soak period. Wait a while and it can start.
• Check the screen at the inlet hoses on the tap for obstructions.
• Clean the screen periodically.

• 

Ensure the washer is plugged into the outlet and is receiving power

Samsung washing machine problem: washer fills with incorrect water temp

Samsung Wash Fix / Solution:

• Turn both taps into fully open.
• Make sure the temperature selection is correct.
• Ensure that the hoses are connected to the correct tap.
• Flush water lines.
• Check the water heater.
• It should be set to give a minimum of 120 ° F of hot water to the tap.
• Also check the capacity and recovery rate of the water heater.
• Disconnect hoses and clean the screen.
• Hose filter screen can be plugged.

• 

Ensure that both taps are fully open if there is incorrect tempering or no water

Samsung Washing Machine Problem: Washer Leaks Water

Samsung Wash Fix / Solution:

• Make sure the door is firmly closed.
• Ensure all hose connections are tight.
• Make sure the end of the drain hose is inserted correctly and is safe for the drainage system.
• Avoid overloading.
• Use high-capacity detergents to prevent over-drying.

• 

Ensure that the water supply hose in the washing machine is connected securely and correctly

Samsung washing machine problem: wash load is excessively wet at the end of the wash cycle

Samsung Wash Fix / Solution:

• Use high or extra high spin speed.
• Use high-capacity detergents to reduce over-drying.
• The load is too small.
• Very small loads (one or two items) may be unbalanced and do not drop out completely.

Samsung Washing Machine Problem: Washer Is Too Dense

Samsung Wash Fix / Solution:

• Use high-efficiency detergents to prevent over-drying.
• For soft water, small or light dirty loads

Samsung washing machine problem: the detergent remains in the automatic machine after the wash cycle

Samsung Wash Fix / Solution:

• Ensure that your washer is running with sufficient water pressure.
• Ensure that the detergent selector dial is in the upper position when using granulated detergent.

Samsung Washing Machine Problem: Washer has excessive vibration or noise

Samsung Wash Fix / Solution:

• Make sure your washer is set on a level surface.
• If the surface is not flat, adjust your washer legs to level the device.
• Make sure shipping bolts are removed.
• Make sure your washer is not touching any other objects.
• Make sure the laundry load is balanced.

• 

Make sure the washing machine is level – use a wrench on the feet to adjust

Samsung Front Loading Washer Replacement Parts

Which part has failed to troubleshoot using the Samsung Front Washer Loading Information Fault Code …

Samsung Front Load Washer Fall Code: OE

Samsung FAULT CODE Department: Water detected at safe water level.

Samsung Front Load Washer Fall Code: E2

Samsung FAULT Code Definition: Jam Key.

Samsung Front Load Washer Fault Code: tE

Samsung FAULT Code Definition: Temperature Sensor Problem.

FAULT Code Solution / FIX: restart cycle.

Samsung Front Load Washer Fall Code: 3E

Samsung FAULT Code Definition: Motor Problem.

FAULT Code Solution / FIX: restart cycle.

Samsung Front Load Washer Fall Code: 2E

Samsung Fault Code Definition: High / Low Voltage Detected.

FAULT Code Solution / FIX: restart cycle.

Samsung Front Load Washer Fall Code: 7E

Samsung FAULT Code Definition: AG + Kit Problem.

Samsung Front Load Washer Fall Code: AE

Samsung FAULT Code Definition: Communication error between SUB PBA and MAIN PBA

Samsung Front Load Washer Fall Code: SF1, SF2, SF3

Samsung FAULT Code Definition: System Failure

Samsung Front Load Washer Fault Code: SUSS

Samsung Fault Code Definition: Too many suds are detected during a washing session.

The unit is kept until the suds are reduced. Then, the unit will return to operation. When it finishes washing, the “End” and “SUSS” codes will blink alternately.

FAULT CODE SOLUTION / FIX: To prevent this, cut the detergent

Samsung Front Load Washer Fall Code: Dc

Samsung Fault Code Definition: Unbalanced load prevented your washer from spinning.

FAULT Code Solution / FIX: Redistribute the load, press the Start / Stop button.

Samsung Front Load Washer Fall Code: dL

Samsung Fault Code Definition: The door is unlocked when the washer is on.

FAULT CODE SOLUTION / FIX: Press the power button to turn off your washer, then restart the cycle.

Samsung Front Load Washer Fault Code: dS or D5

Samsung Fault Code Definition: The door remains open while the washer is on.

FAULT CODE SOLUTION / FIX: Close the door tightly and restart the cycle.

Samsung Front Load Washer Fall Code: FL

Samsung FAULT Code Definition: Your washer failed to lock the door.

FAULT CODE SOLUTION / FIX: Close the door tightly and restart the cycle.

Samsung Front Load Washer Cold Code: Hr

Samsung FAULT code definition: water temperature control problem. (Heater control problem) Samsung Front Load Washer Fall Code: LE

Samsung FAULT Code Definition: Your washer has tried to fill, but has not reached the proper water level.

Samsung Front Load Washer Cold Code: LO

Samsung Fault Code Definition: Door will not unlock.

FAULT CODE SOLUTION / FIX: Make sure the door is firmly closed. Press the power button to turn off your washer, then turn it back on again.

Samsung Front Load Washer Fault Code: nd

Samsung FAULT Code Definition: Your washer is not draining. It may also mean that a small stop is sensed while squeezing the unit.

FAULT Code Solution / FIX: Clean the drain filter.

1. Turn off the unit for 10 seconds and then turn it back on again.
2. Select the spin cycle only.
3. Press Start / Pause to drain the water.

Samsung Front Load Washer Fault Code: nF

Samsung Fault Code Definition: Your washer has tried to fill with water, but failed.

FAULT CODE SOLUTION / FIX: Ensure that water taps are open all the way. Check for kinked hoses. Check the inlet screen on the filling hoses. If you use a flood protection device, please remove the equipment and connect the water hoses directly to the unit. Check if the hot water supply hose is connected. You have to connect the hot water supply hose because the hot water supply is done by the Auto Temperature Control (A.T.C.) function if the cold water temperature is below 59 ° F.

Samsung Front Load Washer Fault Code: nF1

Samsung FAULT Code Definition: Hot / cold water hose connection is incorrect.

FAULT CODE SOLUTION / FIX: Please connect the connection of hot / cold water hose correctly.

Samsung Front Load Washer Fall Cod: Senior

Samsung FAULT Code Definition: Problem with Control Board.

Have questions to repair your Samsung Front Load Washer? Please leave your question below and we will help.

Basement Drain Backing Up When Washing Clothes