VOLTAS AC SI,CL,EC,SC ERROR

VOLTAS AC SI,CL,EC,SC ERROR

Super Silent Feature

Applicable Models: Inverter Models: Vertis, Verdant, Venus

Key Features

Cools Super Silently with Noise level as low as 28dBA

-Comfort during operation

How to Use

-Press TEMP Key on the Remote 4 times continuously

-Display shows SI

-Remote Display also shows SI

-Fan and Compressor run at a pre-defined speed

-Recommended to use in low load condition  

Ice Wash Function (VOLTAS AC SI,CL,EC,SC ERROR)

Applicable Models: Inverter Models: Vertis, Verdant, Venus

Key Features

Maintains the cooling performance if used at regular intervals

-Maintains Airflow

How to Use

-Press Turbo Key on the Remote 4 times continuously

-Display will show

-Freezes the Eva with moisture in the air then removes away dirt in rapid melting.

Filter Clean Indicator Function

Applicable Models: Inverter Models: Vertis, Verdant, Venus

Key Features

-Reminds to Clean Air-Filter

-Maintains the Cooling Performance

-Maintains Airflow

-Saves on Electricity Consumption

-Low Cooling Service Calls can be avoided

How to Use

– Filter will show CL as an indication to clean the filter after 600Hours

-Display will show “CL”

-Display will remind every time for the first 15 sec when the machine Power ON

-Remove and Wash the Dirty Air-filter

-Re-install the Clean Air Filter

-To reset the Clean filter reminder press the Sleep button 4Times on the remote.

Low Gas Diagnosis

Applicable Models: Fixed Speed

Key Features

-Auto-detection of Low Gas

-Enhances Compressor Life

-Saves on Electricity Consumption

-Faster Customer Complaint Resolution

-Customer Satisfaction

How to Use:

-Indoor automatically senses the Low Gas and flashes “EC” on Indoor Display

– After the Compressor starts the coil sensor checks temp at the coil on every 8 Minutes. It should be less than 3*C against before the Compressor start. If Temp not reduced at the coil sensor then the Compressor Supply is Off. It’s repeated 3 times with the above criteria. If the temp does not reduce at the Coil sensor then Finally get the error “EC” over Display.

voltas split ac error code list pdf

Klimaire AC Error Codes| Troubleshooting